CW-07 Water Decoloring Agent resin for Ink wastewater treatment
Specifications:
| Appearance: | Colorless or Light-color liquid |
| Solid Content: | ≥50% |
| Specific Gravity at 20°C: | 1.1-1.3 |
| PH Value (30% water Solution): | 2.5-5.0 |
| Viscosity(25°C,mPa.s): | 5-50 |
| Solubility: | Dissolve in Water absolutely |
| CAS No | 55295982 |
| Storage Temperature: | 5-30°C ,can not be placed in the sun |
Advantage:
1. factory since 1985
2. De-color high-colority effluent from dyestuffs plants..
3. Stronger decolorization (50%~99%) and removal of COD (50%~80%).
4. Free samples for clients
Application Method:
1. The product shall be diluted with 10-40 times water and then dosed into the waste water directly. After being mixed for several minutes, it can be precipitated or air-floated to become clear water.
2. The pH value of the waste water should be adjusted to 7~8 for better result.
3. When the colority and CODcr are relatively high, it can be used with the help of polyaluminum chloride, but not mixed together. In this way, the treatment cost can be lower. Whether polyaluminum chloride is used earlier or afterwards depends on the flocculation test and the treatment process.
Package and Storage:
1. It is harmless, non-flammable and non-explosive, it can not be placed in the sun.
2. It is packed in plastic drums with each containing 30kg, 50kg, 250kg ,1000kg, 1250kg IBC tankor others according to your requirements.
3. This product will appear layer after a long-term storage, but the effect will not be affected with stir. Storage temperature: 5-30°C
Usages:
It is mainly used for color removal treatment for high-colority waste water from dyestuffs plants. It is suitable to treat waste water with activated, acidic and disperse dyestuffs.
It can also be used to treat waste water from textile industry and dye houses, pigment industry, printing ink industry and paper industry.
Product Tags:
|
|
Colorless / Light color liquid Water Decoloring Agent Resin For Ink Wastewater Treatment Images
|
